Products and Services

Just Say the Word, We Can Do it all!

Rise to the top

SB900

After 30 years the SB900 has received a much-deserved UPDATE!!!

Backlit LCD-easier to see in dimly lit areas
NO Voltage Selector Switch
1. Accepts 120/240 Volts (85~264VAC)
NO On/Off Switch
1. Now uses Keypad to Turn On/Off
9 pin serial port connection replaces 25 pin
1. Allows for more printer options
NO external AUXILLIARY MODULE
1. All 600+ calibrations are preloaded!!
Capable of saving user settings to memory Including Baud Rate for Printer/PC connectivity
Auto-Shutoff after 4 hours of non-use USER May Change to NO Auto-Shutoff, 1, 2, 4 or 8 Hours
Returns to Last Commodity Selected/Used upon restart or powering back on
When ordering, please inform Steinlite of products to be tested (Additional Funnels may be necessary) as well as, if a printer will be used.
New Shipping Box; no more puzzle pieces to figure out. Box w/ two Foam Inserts; SIMPLE.

The SB900 continues to be the workhorse of the nut industry. It is the only moisture tester on the market capable of testing Almonds, Pecans, Cashews and several other varieties of nuts while still in the shell. It is used almost exclusively in the Almond Industry. Did you know that the U.S.A. is the world’s leading producer of edible nuts? That is why the SB900 continues to be such a valuable asset to this industry.

The SB900 utilizes Three Different Funnels to obtain optimum results:

The Regular Funnel – included with every purchase
The Nut Funnel – refer to Calibration List to see which calibrations require this
The Compressor Block and Funnel – refer to Calibration List to see which calibrations require this

The SB900 has the ability to be connected to a ticket printer:

CP103 Thermal Printer
MP20 Thermal Label Printer (OBSOLETE)
Both require an RS232 NULL Modem Cable supplied by Steinlite
NUPRINT 310 Printer

count on us

Stein mill

The M2 Mill has gone through some changes over the last 3 years. We have done this to maintain a competitive price and still be able to offer a one of a kind Grinder/Extractor that is durable and effective.

The Motor has been upgraded to a 1/2HP motor Capable of turning out up to 17,000 RPMs.
The grinding blade has been re-designed using Hardened Tool Steel, now with cutting edges on all sides. This allows users to simply flip blade over after normal wear to continue using.
Updated Digital Timer, removing external Start/Stop Button. This means less parts, less potential for problems.

New Shipping Container; Gone are the Treated Wood Crates that weighed a ton. Now shipped in Heavy Weight Cardboard w/ Foam shipping inserts.

try, try again

SL95

The SL95 is NTEP Approved for commercial use. Still the fastest NTEP Approved Moisture tester on the market; returning a result in under 8 seconds. Easy to use, reliable, and durable. The SL95 adheres to the same standards as other NTEP/UGMA moisture testers on the market; however, it comes at a better price point. Things to look forward to this year for the SL95:

New Commodity Calibrations, including HEMP Seed
Refreshed Look w/ new Outer Color Update
Updated LCD Display, Brighter with more contrast easier to read
All available calibrations now loaded at factory, 100+
Re-Designed Shipping Box; we did away with the poly-strapping/buckle and foam. Now consists of a box and two foam inserts. Again, SIMPLE.

Need A Hand? Maybe This Will Help

FREQUENTLY ASKED TROUBLE SHOOTING QUESTIONS

MY SB900 SAYS “CAN’T BALANCE”, WHAT DO I DO?

CHECK TO MAKE SURE THE CELL DOOR IS COMPLETELY CLOSED
IF THE CELL DOOR IS CLOSED THE MACHINE NEEDS TO BE RETURNED TO STEINLITE FOR REPAIR

MY SB900 SAYS “PLEASE EMPTY CELL”.

MAKE SURE NOTHING IS STUCK IN THE CELL
IF THE EMPTY MACHINE NEEDS TO BE RETURNED TO STEINLITE FOR REPAIR

I ENTER THE CALIBRATION ID ON MY SB900 BUT IT DOESN’T SHOW UP ON DISPLAY

BE SURE THAT THE AUX MODULE IS COMPLETELY PUSHED INTO THE SOCKET, YOU SHOULD HEAR A SUBTLE ‘CLICK’ WHEN IT IS SEATED FULLY
ARE YOU SURE THAT THE MODULE HAS THAT CALIBRATION LOADED?
YOU CAN ALSO CHECK TO MAKE SURE THE KEYPAD CABLE IS INSTALLED CORRECTLY
IF ALL OF THESE ARE IN PROPER WORKING ORDER THEN THE MACHINE NEEDS TO RETURNED TO STEINLITE FOR REPAIR

THE DISPLAY ON MY SB900 JUST HAS "BLACK SQUARES" ON IT

MACHINE NEEDS TO BE RETURNED TO STEINLITE, THIS IS A BOARD ISSUE TYPICALLY AND NEEDS ADDITIONAL REPAIR IMMEDIATELY

I TURN MY SB900 ON AND NOTHING SHOWS ON DISPLAY OR LEDS, I KNOW ITS PLUGGED IN

CHECK THE FUSE IN THE FUSE HOLDER WHERE THE POWER CORD PLUGS INTO MACHINE
WE SUGGEST REPLACING THE FUSE EVEN IF YOU BELIEVE IT TO BE IN GOOD WORKING ORDER
IF THIS DOESN’T SOLVE THE PROBLEM THEN THE MACHINE NEEDS TO BE RETURNED TO STEINLITE

WHEN I POWER ON MY SL95 IT DISPLAYS “FUNNEL SENSOR BLOCKED OR DEFECTIVE”

MOST LIKELY THE CLEAR SENSOR ‘EYES’ ARE DIRTY; TURN POWER OFF, REMOVE THE BLACK BEZEL FROM THE TOP OF THE MACHINE AND BLOW COMPRESSED AIR ON THE UNDERSIDE OF BEZEL; REPLACE BEZEL TURN ON MACHINE
IF THE MESSAGE PERSISTS THEN IT’S POSSIBLE THERE IS AN ISSUE WITH THE WIRING OR THE TWO WIRE LEADS ON ONE OF THE SENSORS ARE TOUCHING. YOU CAN USE A CREDIT CARD TO SEPERATE THEM IF YOU FIND THIS TO BE THE CASE
IF THIS STILL DOESN’T CLEAR THE ERROR THEN SEND THE MACHINE BACK TO STEINLITE

MY SL95 SAYS “CELL BOARD NOT RESPONDING”

TRY CLEARING MESSAGE BY TURNING MACHINE OFF AND ON.
IF THIS WORKS YOU CAN STILL USE THE MACHINE BUT IT REALLY SHOULD BE SENT BACK TO STEINLITE AS SOON AS POSSIBLE

MY SL95 HAS A “REFERENCE OUT OF TOLERANCE” MESSAGE ON SCREEN

TRY TURNING POWER OFF THEN ON
IF THIS WORKS YOU CAN STILL USE THE MACHINE BUT RETURN IT TO STEINLITE FOR SERVICE AS SOON AS POSSIBLE

WHEN DROPPING A SAMPLE THROUGH MY SL95 IT READS MOISTURE HI/LO OR MACHINE HOT

THESE ARE USUALLY GOOD INDICATORS OF A MOUSE HAVING LIVED INSIDE YOUR MACHINE AND NEEDS TO BE RETURNED TO STEINLITE FOR REPAIR.

DOES IT MATTER WHICH WAY I MOUNT MY NEW BLADE FOR MY STEIN M2 MILL?

WE RECENTLY REDESIGNED THIS BLADE AND NO IT DOES NOT MATTER WHICH WAY YOU MOUNT THE BLADE
IN FACT, WHEN ONE SIDE DULLS YOU MAY FLIP THE BLADE OVER TO CONTINUE TO USE.